ICP-AES快速测定钛铁矿精粉中钛、铁、钒的含量

Rapid Determination of Ilmenite Flour Content in Titanium Iron and Vanadium by Using ICP-AES

摘要:

钛铁矿精粉中二氧化钛的含量一般在40%~50%，全铁含量一般在30%~45%，二者在钛铁矿精粉分析过程中对其他组分测定造成干扰，同时大量钛的水解会造成分析工作的失败，通过氢氟酸—王水—硫酸分解样品，在8%的硫酸和10%的盐酸介质中，用ICP-AES以国家标准物质作标准曲线，快速测定钛铁矿精粉中钛、铁、钒的含量，该法简便快速，选择性好，准确度高。

Abstract:

Titanium dioxide content of Ilmenite concentration is generally 40%~50%, and total iron content is generally 30%~45%. Both will cause interference to the determination of other components during the analysis process of ilmenite concentration. A lot of hydrolysis of titanium can cause failure in analysis work. Samples are decomposed by using hydrofluoric acid-aqua regia-sulfuric. In 8% sulfuric acid and 10% hydrochloric acid medium, using ICP-AES national standard material as the standard curve, the contents of titanium, iron, vanadium in ilmenite fine flour can be rapidly determined. The method is simple, selective and accurate.